7373724151 | 7402624151 | 0431 - 2744151

             email : civilchemtry@gmail.com


 
  • banner001
  • banner002
  • banner003
  • banner004
  • banner005

   OUR SERVICE

   Chemical Base Water Proofing Coating.
   Polymer Modified Cementitious Water Proofing – Bathroom, Balcony, Service area Etc.,



Polymer Cement Water Proofing Coating is mainly made of acrylic polymer emulsion and cement and other admixtures. It is a two–component water proof coating. The product is a new generation of environmental protecting waterproof coating without solvent pollution, fire resistant, non–toxic, nonpolluting; with excellent properties of polymer and mineral aging resistance, low softness, resilience, high cohesion, water resistance and good crack resistance. The product can be used on wet basis, with a certain gas permeability, high solid content, and good compatibility with other waterproof materials. Thus it has simple security, short construction period, and it can firmly bond to other decorative and it also can be used as decorative with pigment added in.
Area of Application
  • Water Tanks
  • Bathroom, Balconies, Terraces
  • Swimming pools and pool decks
  • Water Features and ponds
  • Planter Boxes, Canopies
  • RCC Roof Terrace

Features and Benefits.

  • Flexible, elastic & can bridge cracks
  • Accommodates flexible movements in suspended structures
  • Can be tiled over successfully
  • Bonds well to sound substrates
  • Ability to withstand heavy topping without fracture
  • Applied on damp walls and floors
  • Can be painted over with elastic paints
  • Hard and abrasion resistant
  
 
Polymer Modified Cementitious Water Proofing – RCC Terrace,   Slope Roof




Polymer Cement Water Proofing Coating is mainly made of acrylic polymer emulsion and cement and other admixtures. It is a two – component water proof coating. The product is a new generation of environmental protecting waterproof coating without solvent pollution, fire resistant, non – toxic, nonpolluting; with excellent properties of polymer and mineral aging resistance, low softness, resilience, high cohesion, water resistance and good crack resistance. The product can be used on wet basis, with a certain gas permeability, high solid content, and good compatibility with other waterproof materials. Thus it has simple security, short construction period and it can firmly bond to other decorative and it also can be used as decorative with pigment added in.
Area of Application

  • Water Tanks
  • Bathroom, Balconies, Terraces
  • Swimming pools and pool decks
  • Water Features and ponds
  • Planter Boxes, Canopies
  • RCC Roof Terrace

Features and Benefits:

  • Flexible, Elastic & can bridge cracks
  • Accommodates flexible movements structures
  • Can be tiled over successfully
  • Bonds well to sound substrates
  • Ability to withstand heavy top fracture
  • Applied on damp Walls and floors
  • Can be painted over with Elastic Paints
  • Hard and abrasion resistant
  
Polymer Modified- Water Tank, Sump, Lift Bit



Polymer Cement Water Proofing Coating is mainly made of acrylic polymer emulsion and cement and other admixtures. It is a two– component water proof coating. The product is a new generation of environmental protecting waterproof coating without solvent pollution, fire resistant, non–toxic, nonpolluting; with excellent properties of polymer and mineral aging resistance, low softness, resilience, high cohesion, water resistance and good crack resistance. The product can be used on wet basis, with a certain gas permeability, high solid content, and good compatibility with other waterproof materials. Thus it has simple security, short construction period and it can firmly bond to other decorative and it also can be used as decorative with pigment added in.
Area of Application

  • Water Tanks
  • Bathroom, Balconies, Terraces
  • Swimming pools and pool decks
  • Water Features and ponds
  • Planter Boxes, Canopies
  • RCC Roof Terrace

Features and Benefits.

  • Flexible, elastic & can bridge cracks
  • Accommodates flexible movements in suspended structures
  • Can be tiled over successfully
  • Bonds well to sound substrates
  • Ability to withstand heavy top fracture
  • Applied on damp walls and floors
  • Can be painted over with elastic paints
  • Hard and abrasion resistant
  
Crystallization Water Proofing – Swimming Pool, Basement, Terrace



Crystallization Waterproofing solution made available by us in form of Greenseal 200. This coating is applied through brush/spary whish is applied for achieving waterproofing as well as for protection of concrete / sand /cement. Having a cement base , these are supplied in powder from as well as formulated using fine quartz sand , active chemicals and Portland cement. Further, the chemicals require presence of water in capillaries for penetrating as well as forming sealing crystals
Features:

  • Surface applied usage
  • Special active Greenseal chemicals help in penetrating as well as becoming integral with concrete and is not easily damaged
  • Tolerate water, thus substrate are not required for drying out before application
  • Can be applied to damp surface as well as surfaces with water including even against high water pressure
  • Greenseal 200 slurry can be applied to inside/outside durfaces that provides for total protection to concrete
  • In case of wall developing shrinkage cracks, unique of greenseal help in reacting with moisture for sealing off leakages event of high water pressure
  
Elastomeric Waterproofing – Open Terrace Press Tiles & Plastered area



Elastomeric Waterproofing solutions offered are designed to provide superior waterproofing support and deliver high performance in given end usage areas. These elastomeric acrylic based water proofing coating are made available with anti fungal as well as crack bridging ability which are recommended for providing desired protection of exterior cementations surface areas. Some of the areas where these are suitable include RCC Structure, Masonry Walls, Sloping/Flat Roofs, Cooling Tower, Bridges and others.

Features:

  • Designed to deliver reliable crack bridging
  • Having low water absorption
  • Providing for high alkali resistance
  • Allows low dirt pick up
  • Seamless membrane support with improved breath – ability
  • Designed to provide longer exterior durability
  • UV resistant finish
  • Water based as well as environment friendly option support
  • Can also be tinted to desired shades as desired by the customers
  
   Protective Coating

Summer Cool Paint & Heat Reflective Coating



We offer a range of heat Solar Reflective Coatings/cool Job work Heat Reflective Coating s which are ultraviolet resistant and offers a continuous rejection of solar heat which leads to a drastic reduction of roof heat. As we offer innumerable advantages through our heat resistant coatings our range has numerous application areas.
Area of Application:

  • Exterior RCC Roof terrace
  • Asbestos sheets
  • Sloping roofs, Farm shed
  • Roofs & walls of residential and commercial buildings
  • Ware Houses, God-owns, Cold Storage
  • Chemical plants
  • Pharmaceutical Industries
  • Food Processing Areas
  • Bottling Plants
  • Electric/Electronics Industries
  • Computer Rooms
  • Hospital Operation Theaters & Corridors
  • Nuclear Power Plants
  • Dairies & Breweries
  • Laboratories
  • Aerospace Industry
  • Airport Hangers
  • Picture Tube Manufacturing Plants
  • Automobile Workshops
  • Fermentation Floors in Tea Gardens
  • Textile Mills

Features & Benefits:

  • Excellent Heat & uv resistant properties
  • Remains white to reflect the suns heat, dramatically lowering roof substrate temperature,
  • Of the cost is saved in the area of humidification and air conditioning
  • Energy saving, cuts electricity bills
  • Easy to apply. Flow able consistency for self leveling application.
  • Has excellent bond to concrete and other substrates like Kota stones(seamless, non staining) does not allow growth of bacteria hence suitable for potable water or food storage
  • Good resistance to abrasion. Does not generate dust even under vehicular traffic
  • Available in attractive Colors
  • Excellent resistance to chemicals
  • Seamless floor which is cleaned to maintain hygiene
  • Resistance to wide range of chemicals
  • Good abrasion resistance
  • Available in range of colors
  
Anti Corrosive Coating



We are engaged in providing high performance anti corrosive Anti Rust Coating viz coal tar epoxy coating, which are based epoxy and graft polymer plastic paints and play a very important role in fighting corrosion and erosion. These anti corrosive coating are having anti algae & anti moss effect also. 

Our array is widely used in a number of industries such as:

  • M.S pipe line for sewage and drinking water
  • Metallic structure & girdles
  • Storage cement & metallic tanks
  
Anti Fungal Coating



We are offering a high performance Elastomeric acrylic based waterproofing coating Acrylic Elastomeric waterproofing is a High Performance Elastomeric Acrylic Based waterproofing coating with Anti Fungal Coating & Bridging Ability. Recommended for protection of Exterior Clementine’s Surfaces.
Areas of Application:

  • Tiles Roof/Concrete Roof Slops
  • Damp Wall Area
  • Planter Pox
  • RCC Structure
  • Sloping Roof
  • Flat Roofs
  • Cooling Tower
  • Bridges

Features and Benefits:

  • Reliable Cracks Bridging
  • Low Water Absorption
  • High alkali Resistance
  • Low dirt pick up
  • UV Resistant
  • Water Based & Environment Friendly
  • Can Be Tinted TO desired shades
  
Water Repellent Coating



Water Repellent Coating solutions offered comprise high performance water repellent coating and waterproofing solutions based on water-dilatable Potassium Methyl Sultanate. It helps in achieving colorless water repellent surface finish for building material without bringing significant in permeability of water vapor. These also find usage for providing barrier against rising damp as well as for meeting the effective usage value that remains effective for 10 to 20 years.
Features:

  • The Treatment provided with water repellent helps in preventing efflorescence of salts
  • Helps in providing water repellency on aerated concrete, natural stones, low-fired clay products as well as plastered surface water repellents
  • Also meeting the surface treatment needs for concrete as well as for damp proofing building ground
  • Applied on walls for preventing stains as well as inks from entering wall & granite

Application Areas:

  • Exterior/interior usage
  • Treating joints of tile surface that are in contact with water like school corridors or washrooms
  • For treating above ground masonry surfaces like Concrete, Brick, Stone  walls
  • Suitable for use on Cladding on exteriors of buildings, Stone surfaces, Concrete Panels as well as all calcareous building materials
  • For treating cement painted of Granite, Sand Textured
  • Also suitable for stone surface painting on outside walls
  
Epoxy Based Protective Coating Work for Tank



Epoxy Based Protective Coating Work for Tank is a two component Epoxy resin based waterproofing compound. One part is consisting of epoxy resin and the other part with curing agent. After mixing both the parts it can be thinned down with water. It possesses all the attributes of normal solvent based epoxy compositions such as excellent water and chemical resistance, adhesion, hardness, toughness and mechanical strength. One of the major advantages of Epoxy over solvent based epoxy is that it can be applied on damp surface also. Being free from solvents, it does not pose any health hazards or fire hazards to the applicator. Epoxy is completely safe, convenient & economical to apply.
Areas of Application:

  • Cement-Concrete water storage tanks.
  • Damp walls (Interior / Exterior)
  • As a primer before painting (Interior / Exterior)
  • Coating on walls of Breweries & Food processing industries.
  • As a primer before application of coating in Food & Drug industries.
  • As a putty with OPC-white cement to fill the cracks of external walls.
  • Hatcheries & Aqua farms.

Features & Benefits:

  • Water dilutable
  • Being water based it penetrates in concrete / plaster surface, seals the porosity and network of fine cracks.
  • Reduces water permeability.
  • After curing it forms hard, tough and strong film.
  • Bonds strongly on cement concrete / mortar, plaster, asbestos sheet, etc Surface.
  • Excellent resistance to water, salt water, dilute acids, alkali, soap water and other chemicals.
  • Excellent resistance to (hydrostatic) water preeure.
  • Non toxic
  • Non hazardous, non flammable
  • Can be applied on damp surfaces.
  • Can be over coated by solvent based and water based paints.
  • Performs well in a temperature ranging from -20ᴼC cel to 80ᴼC cel.
  • Resistant to the growth of Fungus & micro-organisms.
  • Excellent washability to cured film, Stains can be easily removed with a soap solution.
  
   Grouting Services

Cementitious Grouting Services



Cementitious Grouting Service is a premixed cementitious non-shrink grouting system specially formulated to produce a high performance, pourable grout with high strength and slightly expansive properties. It is a blend of Portland cement, graded fillers and chemical additives, which impart controlled expansion in the plastic, state which whilst minimizing water consumption.
Area of Application:

  • Repair of Pre-cast concrete
  • Floor repairs and toppings
  • Heavy equipment and machinery foundations
  • Pre fabricated unit joints and cable grouting
  • For anchoring of holding bolts hooks etc.

Features and benefits:

  • Adjustable consistency & free flowing shrinkage compensated
  • Excellent bond strength & High strength characteristics for rapid result
  • Impact resistance & non shrink property of the grout provides maximum contact with bearing surface
  • Can be used to 80mm thickness between plate and foundation
  • Watertight and withstands chemically aggressive agents
  • Non –shrink property of the grout provides maximum contact with bearing surface.
  
Free Flow Grout



Bostik flow grout GP is used for general purpose, non-shrink cementitious cement Grout services of gap thicknesses 10 to 75mm. Recommended applications at flowable consistency include stanchion base plates, bolt pockets and void filling. At trowel able consistency Bostik flow grout GP is recommended for bedding load bearing components.

Specification:

  • Non-shrink
  • Simply add correct quantity of water
  • Can be used at floe able or trowalable consistency
  • Chloride free
  • Non-staining

Bostik flow grout GP is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a flowing non-shrink grout for gap thicknesses 10 to 75 mm. Bostik flow grout GP is a blend of Portland cements, graded fillers and chemical additives. The low water demand ensures high early strength. The graded filler is designed to assist uniform mixing and produce a consistent grout.

  
Anchor Grouting Material



Anchor Grouting Material resin based grout material suitably blended with a hardening compound and filler and supplied as a pre measured, two part, resin grout. After hardening , the grout has high mechanical properties. Anchor Grout is used where the difference between the hole diameter and bar is < 25 mm.
Area of Application:
            Anchor Grout is used for high strength corrosion resistant anchoring of bolts and bars from 12 – 25mm diameter into concrete, rock, masonry of brickwork where high speed of installation and early application of load is required, Permanent installation of reinforcement starter bars, foundation bolts, base plates, barriers and safety fences, railway tracks, tie-back anchors, reinforcement doweling abutments , ground anchors for towers, cranes, dock, sills.
Features and Benefits:

  • Rapid strength gain
  • Vibration resistant
  • Corrosion resistant
  • Non expansive
  • Can be placed under water
  
   Membrane Waterproofing

APP Membrane Waterproofing



APP Membrane waterproofing solutions offered comprise bituminous roofing membranes comprising app modified bituminous waterproofing membranes in form of waterproof material, waterproofing membrane as well as waterproofing membranes. The use of polyester reinforcement/fiberglass reinforcement as carrier, APP, APAO as modifier as well as use of covering insulation materials like sands, polyethylene foil or minerals slated also make these superior in performance.
Features:

  • APP torch-on bituminous waterproof membrane
  • Use of carrier like polyester reinforcement/fiberglass reinforcement
  • Use of modifier like APP, APAO as
  • Use of superior covering insulation materials like minerals slated, sands, polyethylene foil
  
   Epoxy Floor Coating
  Industrial Flooring Coating



Industrial Flooring Coating Service offered is based on latest technology support and comprises polyurethane self leveling and chemical resistant epoxy resin floor coating. Some of the reasons of their usage include for availability in range of colors, for providing attractive floor finish, for acting as superior chemical resistance as well as for withstanding foot as well as vehicular traffic. Further, these are also used for providing chemical &abrasion resistant floor finish as well as for slip resistant coating in wet areas.
Features:

  • For providing chemical as well as abrasion resistant floor finish
  • Providing slip resistant coating in wet areas

Advantages:

  • Withstanding foot & vehicular traffic
  • Acting as good industrial chemical resistant
  • Offering wide range of colors for providing attractive floor finish
  
Self Leveling Services



Self Leveling Services is a three component pigmented floor topping which is laid at a thickness of 0.5 mm to 4 mm. Self-leveling System is joint less, monolithic, smooth, nonporous, hygienic and chemically resistant and is easy to clean and maintain. It is available in a number of colors and has sufficient strength to withstand industrial traffic with nylon/rubber wheels. Self –leveling System is Ideal for industrial floor, clean room, laboratories & electronic assembly area, hospitals, switch gear plant room, pharma industries, food processing industries & showrooms.
Area of Application:

  • Chemical plants
  • Pharmaceutical industries
  • Food Processing Areas
  • Bottling Plants
  • Electric/Electronics Industries
  • Computer Rooms
  • Hospital Operation Theaters & Corridors
  • Nuclear Power Plants
  • Dairies & Breweries
  • Laboratories
  • Aerospace Industry
  • Airport Hangers
  • Picture Tube Manufacturing Plants
  • Automobile Workshops
  • Fermentation Floors in Tea Gardens
  • Textile Mills
  
   Pest Control Services
  Post Construction Services



  • If there is loose soil around the walls of your building, we dig a shovel width trench close to the external wall of the building exposing the foundation wall surface up to a depth of 50cm.
  • If there exists a concrete cover or masonry apron around the walls of your building, holes are drilled as close as possible to the plinth wall about 300mm (1 ft) apart from each other. Insecticide is then poured, So that it reaches the soil to eliminate the termites present there and to stop them from re-infesting. If your building is on pillars, the holes are drilled around the pillars and insecticide poured into the soil.
  • Further, on all floors, wood work like doors and windows, which are highly susceptible to termite attack are also protected by treatment. Spot treatment of spraying on infested areas in the walls and ceiling is also carried out.

 

  
  Pre Construction Pest Control Treatment



  • We are engaged in providing Pest Control Treatment. These treatments are carried out in various houses, colonies , industrial establishments, townships, hotels, hospitals etc. The breeding places of these pests are treated with larvicide’s and adult control is done dy fogging during dusk hours.

  
    Filling Sealant
  Crack Filling Sealant Service




  • 1. Crack Filling Sealant Service.
    Crack Filling Sealants service is offered by us to match up with the rising demands of various industries. These finds its application in various areas like baseboard, crack filling of internal/ external walls, moulding, window and door frames, sliding and trim, pipes, other gaps and opening, vents and corner joints. Our range of services is beneficial for providing variety of advantages like excellent weathering, excellent adhesion on plaster, brick, painted surface, metal, resistance to heat and moisture and prevents air and moisture from passing through the cracks and joints.
    Specification:
    Cracks filling of internal/ external walls

    Window and door frames

    Corner joints

    Baseboard

    Pipes

    Moulding

    Vents

    Sliding and trim

    Other gaps and opening

    Our crack filling sealants services offer various advantages that comprise:
    Excellent adhesion on plaster, brick, painted surface,

    metalPrevents air and moisture from passing through the cracks and joints

    Excellent weathering

    Resistance to heat and moisture

 

  

Polysulphide Sealant











































  • Polysulphide sealant offered is based on liquid Polysulphide Polymers that help in providing superior adherence to most of basic civil engineering materials including glass, wood, cementitious substrates, aluminum, mild steel and others. Further, its superior finish also makes it useful for sealing of door-window surrounding joints, expansion joints, floor concrete as well as in meeting the demands of wall masonry separation joints. The constitution helps in achieving rubber like material in pourable consistency after mixing base component as well as curing agent in defined proportions.
    Applications:
    Vertical as well as overhead expansion joints suitable for use in commercial, residential building and industrial areas
    Joints suitable for use in subways, flyovers, concrete roads bridges as well as in airport runways

    Helps in providing joints between plastered masonry walls as well as aluminum door/window section sides

    Helps in curing cracks in concrete present in slab

    Also suitable for joints in water retaining structures like aqueducts, dams, water tank, swimming pool, canals, and Reservoirs.

    Suitable for atomic nuclear power station reactor domes

    Suitable for providing joints between pipe lines as well as for providing light joints on roof

    Features:
    Designed for providing excellent UV resistance after completion of full cure

    Helps in withstanding fully submerged conditions

    Superior chemical and water resistance

    The adhesion provided is compatible to most substrates

    Suitable for storing potable water after getting full cure

    Designed to deliver high thermal flexibility as well as longer service life

    3. Polyurethane Sealant
    Polyurethane Sealant for filling and sealing joints in building construction . It is elastic, weather – resistant, non- sagging , and water tight with excellent adhesion  practically all surfaces. There is no need for a primer . For highly porous substrates . Polyurethane Sealant is a low modulus, one component, Class A polyurethane sealant. When cured it will form a tough, flexible seal capable of cyclic expansion and compression movement of 50 %( +25%) of the original joint width. Polyurethane Sealant is virtually unaffected by normal weathering conditions such as rain, sunlight, snow, sleet, ultra-violet radiation, ozone, atmospheric contamination and pollution. Its excellent weather ability enables it to retain its original properties after years of exposure.
    Area of Application:
    Concrete

    Precast and tilt up panels

    Brick & block work

    Plasterboard

    Aluminum windows

    Granite, sandstone and marble

    GRC, Fiberglass & Specialty panel systems

    Metal curtain wall

    Water tanks

    Features and Benefits:
    Single pack reduces the application failure from heterogeneity by imperfect mixing.

    Saves the trouble of measuring, mixing and De-bubbling

    Forms a permanent tough elastic rubber seal

    Excellent adhesion to a wide range of substrates

    Accommodates continuous and pronounced cyclic movements
    Can be over coated

    Resistant to bio-degradation

  

   Repair Products
   Epoxy Bonding Agent    Tile Adhesive    Integral Admixture (Liquid / Powder)    Floor Hardener
   SBR Latex    Tile Grout    Super Plasticizer    Micro Concrete
   Crack Filler    Epoxy Tile Grout    Curing Compound    Epoxy Zinc
   Plug Leak    Anchor Grout    Rubber Modified Bitumen    Fiber
   Grout Admix    Industrial Grout GP    Quick Setting Admixture    Ready mix mortar

  
  We are Dealing with Leading Construction Chemical